BXZDM - L-12369 DEVELOPMENTAL MATERIAL

  • MSDS: BXZDM
  • Manufacturer: 3M GENERAL OFFICES
  • Product Name: L-12369 DEVELOPMENTAL MATERIAL
  • National Stock Number: 6850-00N061497
Product Identification

Product ID:L-12369 DEVELOPMENTAL MATERIAL
MSDS Date:05/20/1994
FSC:6850
NIIN:00N061497
MSDS Number: BXZDM

Responsible Party
3M GENERAL OFFICES
3M CENTER
ST PAUL, MN 55144-1000
US

Emergency Phone: 612-733-1110

Info Phone: 612-733-1110

Cage: 1BY21

Contractor
MINNESOTA MINING AND MFG CO ENGINEERING DOCUMENT SYSTEMS
SAINT PAUL, MN 55144-1000 US

Telephone: 612-737-4114

Cage: 1BY21

Ingredients

GLYCIDYL AZIDE POLYMER (AVERAGE FUNCTIONALITY 2.7)

Fraction By Weight: >99%

OSHA PEL N/K

ACGIH TLV: N/K


METHYL SULFOXIDE; (DIMETHYL SULFOXIDE)

CAS: 67-68-5

RTECS: PV6210000

Fraction By Weight: <0.1%

OSHA PEL N/K

ACGIH TLV: N/K


ISOBUTYRIC ACID, ISOBUTYL ESTER; (ISOBUTYL ISOBUTYRATE)

CAS: 97-85-8

RTECS: NQ5250000

Fraction By Weight: <0.2%

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES: MILD IRRITATION (REDNESS,
SWELLING, PAIN, & TEARING). SKIN: MILD IRRITATION (REDNESS,
SWELLING, & ITCHING). MAY BE ABSORBED TROUGH SKIN & PRODUCE EFFECTS
SIMILAR TO THOSE CAUSED BY INHALA TION AND/OR INGESTION.
INHALATION: SINGLE OVEREXPOSURE MAY CAUSE CENTRAL NERVOUS SYSTEM
DEPRESSION (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: (HEADACHE, DIZZINESS, DROWSINESS,
INCOORDINATION, SLOWED REACTION TIME, SLURRED SPEECH, GIDDINESS AND
UNCONSCIOUSNESS); IRRITATION (UPPER RESPIRATORY) (SORENESS OF NOSE
& THROAT, COUGHING & SNEEZING). CHRONIC: NONE SPECIFIED BY
MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYES: IMMEDIATELY FLUSH WITH LARGE AMOUNTS OF WATER FOR AT
LEAST 15 MINUTES. GET IMMEDIATE MEDICAL ATTENTION. SKIN: WASH
AFFECTED AREA WITH SOAP AND WATER. INHALATION: IF SIGNS/SYMPTOMS
OCCUR, REMOVE PERSON TO FRESH AIR. IF SIGNS/SYMPTOMS CONTINUE,
CALL MD. INGESTION: DRINK TWO GLASSES OF WATER. CALL MD.

Fire Fighting

Flash Point:EXPLOSIVE.
Extinguishing Media:WATER SPRAY, CARBON DIOXIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:SEE HAZARDOUS DECOMPOSITION SECTION FOR
PRODUCTS OF COMBUSTION. EXPLOSIVE B- IF IGNITED, WILL BURN RAPIDLY
RELEASING LARGE AMOUNTS OF GAS.

Accidental Release

Spill Release Procedures:OBSERVE PRECAUTIONS FROM OTHER SECTIONS.
VENTILATE AREA. EXTINGUISH ALL IGNITION SOURCES. CONTAIN SPILL.
COVER WITH ABSORBENT MATERIAL. COLLECT SPILLED MATERIAL. COLLECT
USING NON-SPARKING TOOLS. CLEA N UP RESIDUE. PLACE IN AN APPROVED
METAL CONTR.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP CONTAINER CLOSED WHEN NOT IN USE.
USE IN A WELL-VENTILATED AREA. AVOID SKIN AND EYE CONTACT.
Other Precautions:CONFINED DECOMPOSITION MAY LEAD TO RUPTURE/EXPLOSION
OF CONTAINER. MATERIAL ITSELF WILL NOT DETONATE; HOWEVER, BE
EXTREMELY CAREFUL OF POSSIBLE OVERPRESSURE OF CONTAINED THERMAL
DECOMPOSITION.

Exposure Controls

Respiratory Protection:AVOID BREATHING OF AIRBORNE MATERIAL. USE
NIOSH/MSHA APPROVED HALF-MASK DUST RESPIRATOR, NIOSH/MSHA APPROVED
HALF-MASK DEMAND SCBA.
Ventilation:USE W/APPROP LOC EXHAUST VENT. PROVIDE SUFFICIENT VENT TO
MAINTAIN EMISSIONS BELOW REC EXPOS LIM. IF EXHAUST (SUP DAT)
Protective Gloves:BUTYL RUBBER, NEOPRENE, (SUP DAT)
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS.
Other Protective Equipment:EMERGENCY EYEWASH & DELUGE SHOWER MEETING
ANSI DESIGN CRITERIA . USE COVERALLS.
Work Hygienic Practices:WASH HANDS AFTER HANDLING AND BEFORE EATING.
Supplemental Safety and Health
WASTE DISP METH: AUTH BEFORE DISP. US EPA HAZ WASTE NUMBER=D001
(IGNITABLE). DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE, AND
FEDERAL REGULATIONS . VENT: VENT IS NOT ADEQ, USE APPROP NIOSH/MSHA
A PPRVD RESP PROT. PROT GLOVES: POLYVINYLALCOHOL, FLUOROELASTOMER
(VITON).

Chemical Properties

Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:NIL
Spec Gravity:1.3 (H*2O=1)
Evaporation Rate & Reference:NIL (BUTYL ACETATE=1)
Solubility in Water:NIL
Appearance and Odor:YELLOW LIQUID, WITH LITTLE ODOR.
Percent Volatiles by Volume:NIL

Stability

Stability Indicator/Materials to Avoid:NO
NOT KNOWN.
Stability Condition to Avoid:DO NOT HEAT OVER 100C.
Hazardous Decomposition Products:CARBON MONOXIDE AND CARBON DIOXIDE,
OXIDES OF NITROGEN, PHOSGENE.

Disposal

Waste Disposal Methods:INCIN IN PERMITTED HAZ WASTE INCIN IN PRESENCE
OF COMBUST MATL. TO REDUCE RISK OF EXPLO EVOLUTION OF GAS WHEN
BURNING THIS MATL, DILUTE W/AT LEAST 3 PARTS OF SOLV, SUCH AS
ACETONE, TO ONE PART L-12369 . SINCE REGS VARY, CONSULT APPLIC
REGS/(SUP DAT)

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.